Hi Dale,
This spring's project was to replace my air intake temp sensor and wouldn't you know it some of this 30 year old stuff on my '94 broke during the process.
I see that you have sourced check valves in the past and that is one of the things that I broke (in this case the one that goes into the throttle body side of the extension manifold grouped with two other tubes and the oil filler tube.
Do you still sell these? I need at least one.
Also, since I'm here, one of the brittle old lines feeding the pressure broke. Do you have recommendation on a brand or vendor for replacement lines?
Thank you and best regards,
David

Hi Dale-
Hope you enjoy your concert weekend.
And I’m hoping you can point me to the Apexi Power FC manual. Im reading VS.1.3 of your FD3S RX-7 PowerFC FAQ and the link to the manual at Q2.d is no longer supported.
Thank you as always...Rick

Hello Dale,
Hoping you might share your seat/rail/mount combo with me. If I read a thread correctly, saw you are tall and have been through this redo before.
I’m 6’2’ with a ‘94 Touring model I will predominately (90%) track. I could even use helmet recommendations if you think it would help me fit into this great car better.
PS...I’m the guy who talked with you a couple weeks ago and who daughter is currently at UWF...
Thank you-Rick

Hi Dale,
I was looking for your write up on cleaning up the key ignition switch for the click click no start problem. I couldnt find it. Can you point me in the right direction?

Thanks, Adam

Hi Dale, i was looking up taking off my UIM and found some older post's from you on a great write up from years ago. I like everyone else cant get to that write up you did. Can i get it from you, and I would like to get the ( Viton Check Valves ) to change those out when i redo the hoses on the car with your HT mentioned rx7 kit.
Thank You. I am a rx7 newbie and would appreciate any help i could get with the info needed.

Hey Dale,

Came across an old thread, do you happen to have any used oem turbo to downpipe, engine to mani or turbo to mani gaskets for an s5 for sale?

Cheers

Dale,

Are you still supplying the Viton check valves? If so I have a couple of questions as well.

Thanks,

Steven

I sent $.
Mailing addy

John Freeman
1822 new river inlet rd
unit 1308
sneads ferry NC 28460

One more question. Where do I get the good silicone vacuum hoses illustrated in your vacuum hose post? I went to hose technique website and they aren't listed there.
Thanks
John[/QUOTE]

Troubleshooting turbos. Do you still sell solenoid ect? Is there a description anywhere on the board? Prices?
Many. Thanks
John

Hi Dale. I live in Gulf a Breeze and could use some help with my 1990 convertible RX7. It is running rough when warm and the code is 9. Think it's a thermosensor on the back of water pump housing? I am debating whether to sell it or get a rebuilt motor from Atkins or ? Any help would be greatly appreciated. Thanks, jon
Wishbonecg@gmail.com