notveryhappyjack notveryhappyjack is offline

1 bar boost

About Me

  • About notveryhappyjack
    Car
    Turbo FB
    Location
    Seattle, Washington
    Gender
    Male
  • Signature
    A/K/A: internallybleedingandhavenoideajack

Statistics

Total Posts
Albums
Visitor Messages
Total Likes
General Information
  • Last Activity: 09-21-22 03:32 PM
  • Join Date: 06-25-05

Social Profiles

Instant Messaging
Send an Instant Message to notveryhappyjack Using...
This Page
https://www.rx7club.com/members/notveryhappyjack-70316/

Friends

Showing Friends 1 to 10 of 15

Visitor Messages

Showing Visitor Messages 1 to 10 of 17
  1. Hard-Luck
    05-20-14 11:10 AM - permalink
    So I put the stock fans/ shroud and it still is getting hot in traffic/ idle!? any other suggestions? Do you think I should just pull and opt for a different set up?
  2. Hard-Luck
    05-13-14 01:35 PM - permalink
    Hi, just saw your email and thank you for the response back & good info! My fans do suck I couldn't get the stock/ fans/ shroud onto my rad, because it would hit my turbo filter and was just a pain in the ass to fit. I am going to take off my filter and try to fit it even tho I think it's to big. My mods off the top of my head are exhaust/ midpipe/ downpipe/ intake/ tial wastegate/ precision t6262 single T, Apexi PFC (older version), FMIC, Alum racing radiator. That's about it I think might be missing some.
  3. Hard-Luck
    05-08-14 04:46 PM - permalink
    Hi, I am in the Everett area and have a 93 touring FD and was wondering if you would be able to give me some pointers I am getting some higher than usual water temps because I thought I could get by with a large FMIC and aftermarket Racing alum radiator being in washington and still have good cooling but I thought wrong the big FMIC blocks most all cool air to the radiator. Do you have any suggestions or a shop that you know that does good work on 7's? Thank you and hope I hear from you soon.
  4. Cuzzynz
    07-30-13 09:14 AM - permalink
    hey man how did you do the 5 lug swap on your fb? also i like the rims on your fb good match looks really good
  5. Slammed_GSL
    07-17-12 06:56 AM - permalink
    Hey bro, long time. Ever get the gremlins out of your car?? Mine is cut and welded right now, complete makeover...hope you can make it to the Carnation meet Aug 4th.
  6. garyc
    05-21-12 05:13 PM - permalink
    Hi nice fb is that bonnet carbon fibre or decal looks like. If its real where can I get one I'm in the middle of a serious build fb series 5 engine garret t04 hybrid injectors 750cc primary 1650 secondary all Ali pipes for inter cooler stainless ceramic coated downpipe ceramic coated turbo housing
    Custom radiator all handcrafted Aluminium
    Nearly ready to start.
    Chalegers brakes rear axle gearbox and clutch any tips or suggestions would be welcome
    All the best Gary
  7. notveryhappyjack
    01-13-12 10:54 PM - permalink
    the paint on my turbo FB is a mitsubishi paint called Memphis Blue Pearl paint code is "T11
  8. Rotard Wankel
    12-09-10 05:54 AM - permalink
    is that a FD motor in a FB?
  9. ckykid02
    09-11-09 01:37 PM - permalink
    you go to lwtc? lol i been there a few times. my papa dukes is one of the auto teachers there.
  10. Jmthegerm66
    09-05-09 10:15 PM - permalink
    umm i think i was running high 16 low 17

All times are GMT -5. The time now is 04:57 AM.