Engine Bay Carbon Wheel Covers
For Sale
#26
Rotary Enthusiast
Thread Starter
You probably saw Touge.tough in IG, he has one of the first sets I sent out
The following users liked this post:
Andyyrx7 (11-20-22)
The following users liked this post:
mr2peak (02-22-23)
The following users liked this post:
mr2peak (12-15-22)
#29
Rotary Enthusiast
Thread Starter
The following users liked this post:
mr2peak (11-24-22)
#31
Rotary Enthusiast
Thread Starter
The following users liked this post:
mr2peak (11-29-22)
The following users liked this post:
mr2peak (12-15-22)
#34
Rotary Enthusiast
Thread Starter
Your group is going into production now. I can't private message you, and it looks like you haven't been on the board in a while. Please contact me and I will send you payment details for your covers.
Another way to reach me is through my Facebook product page. Remove the spaces for the link to work
https://www. Facebook. com /profile.php?id=100086707658140
Another way to reach me is through my Facebook product page. Remove the spaces for the link to work
https://www. Facebook. com /profile.php?id=100086707658140
The following users liked this post:
mr2peak (12-16-22)
#36
Rotary Enthusiast
Thread Starter
I'll send you a message and add you to the production queue
#37
Rotary Enthusiast
Thread Starter
The following users liked this post:
mr2peak (01-31-23)
#39
Rotary Enthusiast
Thread Starter
It will be about 2 months for your group. We are going as fast as we can while making sure we don't have quality issues. These are all hand-made to order.
#40
Junior Member
lmk when you would like payment and I will send asap
thank you again,
Preston
The following users liked this post:
mr2peak (12-18-22)
The following users liked this post:
mr2peak (12-23-22)
#42
Rotary Enthusiast
Thread Starter
Added you.
You can use a carbide cutting wheel on a Dremel like tool and a sanding drum to trim them as needed, easy as long as you take your time and are patient with process. I've had customers fit them with all the USDM OEM parts, you just need to trim them appropriately. Making pre-cut versions will just add to the cost and slow down production. It's a satisfying thing trimming them and getting them on the car, gives you a nice custom tailored part and sets your car apart from the normal bolt-on stuff. Every car with these will all be slightly different depending on how you chose to go about it.
Looks like I haven't been getting notifications for this thread, my apologies. I'll see what I can do to keep on top of it.
You can use a carbide cutting wheel on a Dremel like tool and a sanding drum to trim them as needed, easy as long as you take your time and are patient with process. I've had customers fit them with all the USDM OEM parts, you just need to trim them appropriately. Making pre-cut versions will just add to the cost and slow down production. It's a satisfying thing trimming them and getting them on the car, gives you a nice custom tailored part and sets your car apart from the normal bolt-on stuff. Every car with these will all be slightly different depending on how you chose to go about it.
Looks like I haven't been getting notifications for this thread, my apologies. I'll see what I can do to keep on top of it.
The following users liked this post:
mr2peak (12-27-22)
The following users liked this post:
mr2peak (12-27-22)
#45
Rotary Enthusiast
Thread Starter
Carlos Inglesias, your covers have shipped!
The Thai Baht has gained ~15% since I started selling these covers, unfortunately I need to update the price to reflect this change. They are now $265 shipped internationally. I have tried putting this off for as long as possible, but I need to be able to cover costs and I can no longer do this with the US Dollar falling, and the Baht rising.
Thank you all for understanding.
The Thai Baht has gained ~15% since I started selling these covers, unfortunately I need to update the price to reflect this change. They are now $265 shipped internationally. I have tried putting this off for as long as possible, but I need to be able to cover costs and I can no longer do this with the US Dollar falling, and the Baht rising.
Thank you all for understanding.
#46
Junior Member
Let me know when you are ready for payment
although I think if we were in before the raise we should be grand fathered in, especially if it was months ago but it’s whatevsz
although I think if we were in before the raise we should be grand fathered in, especially if it was months ago but it’s whatevsz
The following users liked this post:
mr2peak (01-14-23)
#47
Rotary Enthusiast
Thread Starter
As much as I wish I could grandfather in the old price, I am making them now, and this change in price is directly connected to my costs. If I had taken your money months ago, I definitely wouldn't be asking for more. For better or worse, I've decided to only accept money when I know 100% that I can deliver products in a timely manner, as promised. I think too many other people take money much too far in advance, and we all know where that leads.
#48
Corn-to-Noise Converter
iTrader: (6)
Join Date: Mar 2002
Location: The Elysian Fields (Texas)
Posts: 1,527
Received 386 Likes
on
154 Posts
Cheers, Carlos
The following users liked this post:
mr2peak (01-14-23)
#49
Rotary Enthusiast
Thread Starter
You paid Dec. 16th. I usually have ~2 week turn-around from billing to delivery, but I took a break from shipping over the holidays (but kept producing parts). I'm back to a regular schedule now