Post pics of your v8 RX7
The following users liked this post:
gnx7 (12-13-22)
The following users liked this post:
RRacerX (01-27-22)
#505
I really wish I could confidently get a hood like this on my car. Had a genuine RE Amemiya but it didn't clear in way to many spots so I decided to sell it instead of cutting/trimming it up.
The following 2 users liked this post by FC3S Murray:
ATC529R (02-14-23),
rlynchster (11-28-22)
The following users liked this post:
Tai-Lun (03-26-23)
The following users liked this post:
Esser (05-02-23)
#511
I bet this rips!
#512
Junior Member
The following users liked this post:
Heyitsryan20 (10-21-23)
#514
Junior Member
iTrader: (1)
Update 12-30-23 New crate motor LS376/480
This was car when purchased in 2017:
Just thought I would post a few pics since I'm kind of new here. Some of you may have seen pics of this car previously since I bought it from another member of this forum. Had it about 5 months now.
It's a blast to drive, gets lots of looks from those not expecting to hear the V8 rumble.
Update: New build: New crate LS376/480, suspension, exhaust, rear end, etc…
Build performed by one of, if not the best, Charlie at Mazcare in Marietta Ga.
Last edited by olddog25; 12-31-23 at 07:43 AM.
The following users liked this post:
ATC529R (12-31-23)
#517
Rotary Enthusiast
^^ digging the exhaust as well. Bet it sounds sick and the neighbors probably don’t like it. 😂
The following users liked this post:
olddog25 (12-31-23)
#518
Junior Member
iTrader: (1)
For my needs (street not track use) close to 500hp is enough for me. I'm an older guy who doesn't really get on it too much like some of the youngsters around here. Now my son...may be a little different story haha.
Can't wait to let the neighbors hear it (like it or not), fortunately got a couple of car guys close by so they'll probably be fine with it. Unfortunately, car is still at Mazcare at this moment. I went down and drove it and took some pics a couple days ago, still a couple of additions not done yet like adding AC, a horn and getting some final dyno numbers. Really does run and sound great, scary fast for me. It will lose grip even up in top of third if you really get on it.
It's getting really close to me bringing her home, hopefully couple more weeks.
Thanks for comment!
The following users liked this post:
ATC529R (12-31-23)
Thread
Thread Starter
Forum
Replies
Last Post
R.O.D
2nd Generation Non-Technical and pictures
13106
03-15-24 06:32 AM
7_rocket
Interior / Exterior / Audio
24
04-30-08 09:51 PM